Welcome to
Azur Electronics
Azur Electronics
Home
Projects
Test Equipment
- Accessories
- Adaptors
- Amplifiers
- Attenuators
- Cables
- Frequency Counters
- Logic Analysers
- Multi-Meters
- Network Analysers
- Oscilloscopes
- Power Meters
- Power Supplies
- Prototyping Equipment
- Signal Generators
- Spectrum Analysers
- Tools
Operating Information
- Operating HP 141T
- Operating HP 1630D
- Operating HP 8175A
- Operating HP 8407A
- Operating HP 8410C
- Operating HP 8552B IF Section
- Operating HP 8553B RF Section
- Operating HP 8554B RF Section
- Operating HP 8555A RF Section
- Operating HP 8556A LF Section
- Operating HP 8594E Spectrum Analyser
- Operating HP 8901B
- Operating LeCroy 9310
Technical
- Allen Key Sizes
- High Voltage Measurement
- HP Cases
- HP Information
- HP-IB Interface Bus
- Measurement Units
- Motorola ECL
- RF Connectors
- RF Power - Voltage Conversion
For Sale
Wanted
Links
About Me
Contact Me
Site Map
HP 1821A TIME BASE
AND DELAY GENERATOR
AND DELAY GENERATOR
The HP 180A was one of the first solid state oscilloscopes (apart from the CRT) and was introduced in 1966. Various plug-in units were available for vertical and horizontal deflections. The HP 1821A Time Base and Delay Generator cost $800 in 1968.
1821A front panel
March 2016
The HP 1821A is a timebase and delay generator, with sweep settings of 1s/div (1Hz) up to 100ns/div (10MHz). The HP 180A Mainframe has horizontal magnification of x1, x5 (50MHz max) and x10 (100MHz max). The red switch selects main, mixed or delayed sweep display. The 1821A was acquired as part of the HP 180A Oscilloscope.
The HP 1821A is a timebase and delay generator, with sweep settings of 1s/div (1Hz) up to 100ns/div (10MHz). The HP 180A Mainframe has horizontal magnification of x1, x5 (50MHz max) and x10 (100MHz max). The red switch selects main, mixed or delayed sweep display. The 1821A was acquired as part of the HP 180A Oscilloscope.
1821A LHS
1821A RHS
1821A bottom
... more to follow ...